Plug In Wireless doorbell with Learning code-WIFI Video Doorbell, Audio Door Phone, Wireless Doorbell, Network Camera, Wall Switch Manufacturer    
export2@yiroka.com 中文

WIFI Video Doorbell, Audio Door Phone, Wireless Doorbell, Network Camera, Wall Switch Manufacturer

 
Yiroka \ 

Plug In Wireless doorbell with Learning code

黑B-289-1

B-289 Black Wireless Doorbell 


Doorbell basic parameters:

Transmitter Size:85*40*20 mm

Receiver Size: 87*78*100 mm

Transmitter Working Voltage:≤ 12V

Transmitter Power Consumption :≤ 10mw

Receiver Working Voltage: AC110/220V 50-60Hz

Sound Volume Range: 25-75dB

Working Frequency: 315MHz/433MHz

Material :ABS 

Color: White/Black/Customized


Doorbell Features:

1. Transmitter powered by DC12V 23A Battery ;                                                                           

2.Receiver: With Plug 

3.Plug Options: USA/EU/UK/AU plug    

4.Learning - Code                                                            

5.36 melodies for Chosen ;                                                                             

6.4 Grade volume adjusting ;                                        

7.IP44 water proof Transmitter ;  

9.Operating range: 300FT(150M) in open air.

10.LED Indicator

11.Simple installation 

12.Receiver plug into a regular socket


Learning Code Function Instruction:

Doorbell is well-paired & ready for using .To replace or add a new transmitter / receiver,please follow steps below:


A. Erasing the program memory :

1.Plug the receiver into the power socket and turn on power

2.Press and hold “Mode “ button on receiver about 10 seconds till hear the “Dingdong”sound. Then ,

the program have been successfully erased.(Transmitter can not control the receiver)


B.How to program/add doorbell :

1.Plug the receiver into the power socket and turn on power

2.Press and hold “Mode “ button on receiver about 5 seconds . Then ,Press the transmitter button twice within 10 seconds ,If the doorbell ring .It is succesfully.Programmed..(Transmitter can control the receiver)



Tips:

If the doorbell does not ring,please repeat above steps.

For pairing multiple transmitters/receivers,please repeat the above steps.



Installation :

1.Open the package,take out the transmitter

2.Open the transmitter by flat Screwdriver,take out the battery insulation film

3.Use the double-side adhesive stick to the wall (flat surface recommended ) .NOTE:Clear the surface before installing.

4.Or dig a small hole on the wall & fix the back cover of transmitter with screws

5.Plug the Receiver into a regular socket within the operating range.



Caution:

1.Please do not open PCB or repair it without professional guide in order to avoid break down of components

2.Please make sure it is not exposed to the Sun and Rain for a long time or closed to the metallic object

3.Operating range may be affected by environmental factors and nearby interference sources

4.Proper use will prolong lifespan of wireless doorbell effectively



*
*
*
Don't want to use this form? Send your files via: export2@yiroka.com
 

Related products

Need Support?

Please search our knowledgebase or submit a ticket by clicking on the green "Q&A" tab on the left side of each page

Support Availability

Mon. - Sat.: 8:00am to 17:30pm
Sun.: Closed
Tel: 86-769-2227-1808/0518

(Note: calls in queue before cutoff time will be answered in te order they were received, currently there is no call back supported)

Shenzhen Yiroka Electronic Co,. Ltd 
Copyright©Yiroka 2023